Tactical .38Super Laser Training Bullet Short Long Ammo Laser Red Laser Trainer Cartridge for Dry Fire Training
Laser Training Bullet Applications:
1. Laser Training Calibration
2. Simulation of ballistic
Specification
1. High brightness & good looking housing: brass with gold-plated.
2. High precision: off axis angle is 0.1mrad.
3. Less power
consumption: 4.5VDC low operating voltage.
4. Long life:> 8000 Hrs.
5. More efficiency.
6. Compact and lightweight.
7. Laser Wavelength: 635nm
8. Type: Visible Red
9. Laser Power: 3mW
10. Battery: use 3 x LR41 / LR626
11. Offaxis Angle: 0.1mrad
12. Range for Sighting: 5-100 yards
13. Dot Size: 1 inches at 25 yards
14. Construction: Brass
15. Temperature: -10 to +50°
16. Life Span: >8,000hrs
How to use the bore sight?
1. Unscrew the back cap from the bore sight by turning counter clockwise.
2. Stand the bore sight on a flat surface with the laser side pointing down.
3. Insert batteries (+ side up) inside the rear opening.
4. Carefully push down and turn the screw cap clockwise to tighten the cap (the laser is now on).
5. Place in your rifle's chamber and close the bolt.
6. To remove - open the bolt if it does not automatically extract, manually remove the unit by tilting the rifle's barrel upward (always practicing safe firearm practices)
7. Unscrew the back and remove the batteries to turn the unit off.
Tactical .38Super Laser Training Bullet Short Long Ammo Laser Red Laser Trainer Cartridge for Dry Fire Training
Laser Training Bullet Applications:
1. Laser Training Calibration
2. Simulation of ballistic
Specification
1. High brightness & good looking housing: brass with gold-plated.
2. High precision: off axis angle is 0.1mrad.
3. Less power
consumption: 4.5VDC low operating voltage.
4. Long life:> 8000 Hrs.
5. More efficiency.
6. Compact and lightweight.
7. Laser Wavelength: 635nm
8. Type: Visible Red
9. Laser Power: 3mW
10. Battery: use 3 x LR41 / LR626
11. Offaxis Angle: 0.1mrad
12. Range for Sighting: 5-100 yards
13. Dot Size: 1 inches at 25 yards
14. Construction: Brass
15. Temperature: -10 to +50°
16. Life Span: >8,000hrs
How to use the bore sight?
1. Unscrew the back cap from the bore sight by turning counter clockwise.
2. Stand the bore sight on a flat surface with the laser side pointing down.
3. Insert batteries (+ side up) inside the rear opening.
4. Carefully push down and turn the screw cap clockwise to tighten the cap (the laser is now on).
5. Place in your rifle's chamber and close the bolt.
6. To remove - open the bolt if it does not automatically extract, manually remove the unit by tilting the rifle's barrel upward (always practicing safe firearm practices)
7. Unscrew the back and remove the batteries to turn the unit off.